Yamaha RX-N600 Digital Network-Ready Home Theater Receiver Review

Average Reviews:

(More customer reviews)I have had this unit for about 2 weeks now. Sound is as good as anything in this price range. I was coming from a Sony 900 series receiver which was failing. This is my first Yamaha. No other manufacturers had networking capability that didn't cost 3 times as much. Plan on spending most of a day setting this up unless you do that kind of thing often.
Most of my comments center around the networking and USB functions because that's why I bought it, to perhaps eliminate my PC as a music source and go direct from this receiver. We'll, it kinda works... The remote is a bit of a sore spot too as with just a bit more functionality it could have been really good, I could have gotten down to one remote but unfortunately it does not control my cable set top box.
Strengths
*Works great with my Sony VCR, remote controls everything nicely.
*Ipod dock (an extra item purchased separately) seems to work very well. Does not play Ipod video though. Remote controls this too
*Nice remote, after you figure it out it is pretty logical. Controls 3 of my 4 components nicely.
*Internet radio is a real winner, seems to have jillions of stations arranged fairly logically by locale. It would be very difficult to duplicate this on your PC unless you enrolled in a pay service. Its like having a short wave radio.
Near misses
*Remote works great with my Sony DVD player, but make sure you have the side switch on "source" to control play, fast forward, etc. Otherwise you won't be able to move the cursor through DVD menus that appear in the movie menu and make choices on how the movie plays.
*If the Remote could just have a little learning it would be great. You won't know if it will control your unit until you try it out. The list of remote codes that Yamaha supplies is vague, does not list models just a bunch of codes for each manufacturer. You just have to try each one for your manufacturer and see if any work. Hit or miss.
*Net/USB did not work with my Creative Zen Nomad jukebox MP3 player, but did work with a Corsair Memory 2gb flash voyager stick. Go figure. I did notice recently that I can set my Zen to act as a mass storgae unit, and to be fair I have not tried that yet.
Weaknesses
*Network music does not work with Microsoft Media Player 11, only 10. I called Yamaha and they said Media Player 11 was not supported. The N600 does not connect reliably to the media library store, sometimes it works fine, sometimes it errors out or just shows an empty list. Very finicky. Media player 11 is in beta so beware, it will become mainsteam shortly and is not supported. I'm not sure if/how Yamaha will remedy this for me.
*Plays wave, WMA and MP3 but not Itunes
*Crude character interface display for the Net/USB functions, like looking at a pong game on an old IBM CGA PC. About as much functionality as a typical MP3 player, you have to scroll through a page at a time in everything. A pain in the neck if you have a large music collection
*Will not control my Motorola DCT700 Comcast cable box, I tried all the Motorola codes and Yamaha says that's all there is, if they don't work you are outta luck. I am.
*Remote has no learning capability.
*Limited inputs for other components, but enough for what I need
*Documentation is OK but the manual is all there is. There is no FAQ or deeper level of detail on their website or anywhere else that I could find. You have to call Yamaha and you will get a live person, but from what I found from 2 calls is they didn't know any more than the manual.
Conclusion: Would I buy this again? Probably not because the networking is so limited, and that was the main reason I selected this model. If you buy a good receiver and go with an attached high quality PC/soundcard you'd be better off.The Yamaha interface does not come anywhere close to the ease of use and nice presentation you get on any PC media player program. That's like comparing a typewriter to using a PC with Word. The USB feature is nice but could be a lot better if it supported more devices.

Click Here to see more reviews about: Yamaha RX-N600 Digital Network-Ready Home Theater Receiver

The RX-N600 is the first Yamaha receiver to offer network receiver functions. Using network connection and Windows Media Connect ver.2 technology, it lets you play MP3, WMA and WAV music from a remote PC. You can also listen to any of the thousands of stations available on Internet radio.

Click here for more information about Yamaha RX-N600 Digital Network-Ready Home Theater Receiver

Read More...

Yamaha HTR-5760 7.1-Channel Digital Home Theater Receiver Review

Average Reviews:

(More customer reviews)Oh Boy ! Prices have come down on quality receivers. Not only do you get more ... but you pay less than the previous version. This one has everything a picky home theater enthusiast is look for:
1 - 7.1 ch amplification
2 - 7.1 preouts (to connect a robust poweramp)
3 - Dolby ProLogic IIx (don't watch movies without it)
4 - Microphone Calibration (not parametric as the name suggests) ... better than an SPL since this measures spkr delays etc.
5 - Adjustable SUB Crossover (down to 40hz)
5 - Construction and overall quality
For Home Theater and Movies ? 5 STARS (Audio in a movie disc is not audiophile grade, so this receiver is just fine for that)
As an audiophile 2-channel receiver ? 3 STARS (get a external good quality poweramp for this)
Suggestions to Yamaha:
1 - Upgrade firmware to allow receiver to use a specific setting as te default for all signals. For instance, if you have a 7 speaker setup ... you should be able to make the player default to Dolby Prologic IIx for any and all signals.
2 - Remove the TUNER and reduce the cost. If you want to listen to the radio ... use that clock radio ! or go out for a drive in your car.
3 - Give us a lighted remote. Any Home Theater component ought to have a lighted remote. I am sure you know why. Right ?
Overall a very good receiver. Good work Yamaha. Bye Bye overpriced Denon.

Click Here to see more reviews about: Yamaha HTR-5760 7.1-Channel Digital Home Theater Receiver

For incredible quality and setup flexibility at an amazingly affordable price, it's hard to top Yamaha's high-current HTR-5760 audio/video receiver. With the HTR-5760 you get the convenience of DVD-Audio/SACD-ready eight-channel analog inputs alongside the latest 6.1- and 7.1-channel surround processing, multiroom control, and premium Yamaha sound technologies.When hooked up with the digital-audio output from a DVD-Video player or digital satellite receiver, the 95-watts-per-channel HTR-5760 handles 5.1-channel surround decoding for both major formats, Dolby Digital and DTS. In addition, the receiver processes Dolby Digital EX, Dolby Pro Logic IIx, DTS-ES Discrete 6.1, DTS Neo:6, and DTS 96/24. The extended-surround formats create even more expansive soundfields through a center-rear surround channel, for which THX suggests using two separate speakers. The result is seven discrete full-range channels in addition to the LFE (low-frequency effects) channel: front left/right, surround left/right, front center channel, and a pair of rear-center channels.A key benefit from a Yamaha receiver, of course, is Yamaha's proprietary signal processing, including Cinema DSP (digital soundfield processing), which creates aural "imaging" that not only makes your home sound like a theater, but also sounds better than most movie theaters. Based on a wealth of measured data in real studios and halls, Cinema DSP is designed to bring out the full potential of movie sound mixes, reproducing them the way directors and sound engineers intended.And, when you're listening to multichannel presentations late at night, you'll appreciate Silent Cinema, which simulates 5.1-channel listening through a pair of ordinary 2-channel headphones (not included). Silent Cinema uses unique parameters for each soundfield to ensure accurate headphone representations of each soundfield.The receiver comes with YPAO (Yamaha Parametric Room Acoustic Optimizer) and a dedicated microphone to help you establish the best possible sound at your primary listening position. The optimizer uses the microphone to "listen" to the sound from the speakers and determine, based on its test-signals, how best to equalize the sound for your room. Corrections include speaker/subwoofer phase relationships, speaker/subwoofer distance measurements (corrects for differences down to 5 cm), frequency response (measures and optimizes each speaker's response using a parametric equalizer), and speaker level (measures and aligns the relative volume levels of all speakers).Then there's the eight-channel DVD-Audio/SACD-ready inputs mentioned above. Due to anti-piracy measures, DVD-Audio and SACD players perform their own digital-to-analog conversion, passing high-resolution analog signals on to your amplifier. (And analog, after all, is what your amp feeds your speakers.)DVD-Audio and SACD can each deliver up to six channels of discrete, full-frequency sound at greater-than-CD resolution (in the case of DVD-A, that means 24 bits, 96 kHz sampling rate versus 16 bits, 44.1 kHz for CD). In stereo or surround, the sound from DVD-Audio and SACD is packed with detail, yet smoother and sweeter from than the sound from even the best standard CD players. The HTR-5760 accommodates decoded DVD-A/SACD signals and routes them to the appropriate speakers in your surround system.The receiver offers five audio/video input connections (all with composite-/S-video, two with component-video), eight fixed and assignable digital-audio inputs (great for DSS, CD, laserdisc, gaming consoles, or minidisc), and front-panel input connections with digital-audio jacks for your camcorder or other spontaneous hookup. The receiver's video circuitry is high-definition ready, too (60 MHz bandwidth), and it will upconvert composite-video to an S-video signal to simplify TV hookup.Last, but certainly not least, the HTR-5760 benefits from Yamaha's Digital ToP-ART (Total Purity Audio Reproduction Technology) build philosophy. The culmination of the best digital engineering and design possible, it brings together several key elements to create the best-sounding, easiest-to-use A/V components available.What's in the Box Receiver, remote control, four AAA batteries, microphone for YPAO, an AM loop antenna, an indoor FM antenna, a warranty card, and a user's manual.

Click here for more information about Yamaha HTR-5760 7.1-Channel Digital Home Theater Receiver

Read More...

Elite VSX-31 A/V Receiver Review

Average Reviews:

(More customer reviews)Incredibly highly functional receiver for a great price. I originally was looking at the VSX-30 but then after I learned you can play iPod to Zone 2 I went with this one. A couple of words of caution, which is why this receiver gets four instead of five stars:
- I upgraded my existing receiver because I needed more HDMI inputs and wanted to have a second zone, i.e., I wanted to install patio speakers. I also bought Apple TV and really wanted to stream via Apple TV to my patio speakers. The manual says the VSX-31 allows for iPod output to Zone 2 and so I incorrectly thought this meant I could take a digital source, i.e., an HDMI input, to Zone 2. Wrong. This receiver does not output digital signals (except for iPod and Internet Radio) to Zone 2. The manual isn't quite clear on this. In the receiver's defense, using the supplied cable for the iPod/iPhone works fine and is an upgrade over the VSX-30. I have not tried Pandora thru my iPhone yet.
- Activating the receiver for Zone 2 is not nearly as intuitive as it should be. The manual is not clear whatsoever, only through trial/error did I get it to work. Basically, the manual tells you to select Zone 2 in the speaker setup menu of which there are five options for speaker setup (Zone 2 is one of the options). What it DOESN'T tell you is select Zone 2 AND THEN EXIT THE SPEAKER SETUP. There isn't anything that shows you a summary of the speakers you selected so there's no way to check it.
- The receiver is definitely more deep than advertised. My cabinet has a total depth of around 15.5-16". After you connect all the HDMI cables and the power cord you quickly learn that you need a little more. Make sure the depth of your cabinet is at least 17", preferably 18". We had to cut a hole in the back of ours to make it fit and be able to close the door.
- I use a Harmony One Remote. When I set up the VSX-31, I plugged my Directv HDMI cable into HDMI 1. I then set my remote such that when I hit Watch TV it set the receiver to HDMI 1. However, what I kept finding was everything worked fine very briefly and then the receiver for some unknown reason would automatically switch to TV/SAT (instead of staying on HDMI 1). Hitting Help on the remote fixed that but I didn't want to hit Help every time I turned on the TV, so I assigned TV/SAT to HDMI 1.
Nitpicks, perhaps. There's many, many good features of this receiver and the price ($400) was right. I wish it would have been more clear on true Zone 2 capabilities and setup.

Click Here to see more reviews about: Elite VSX-31 A/V Receiver

Get 53% OFF

Click here for more information about Elite VSX-31 A/V Receiver

Read More...

Grace Digital GDI-IRA500 Wireless Internet Radio Adapter Featuring Pandora, NPR and SIRIUS Review

Average Reviews:

(More customer reviews)The Grace Solo internet radio does a great job connecting the world of internet radio to my home stereo.
The Solo is good looking and connects simply out of the box. Plug in the power, connect the standard rca cable to your stereo, turn it on, choose your home network and within 5 minutes you are listening to Pandora or one of the 17,000 radio stations. While Grace has many models of standalone table top radios, I like the Solo because it connects directly to my home stereo (or even powered speakers). The solo even has a headset jack.
When you first take the Solo out of the box, you see the Solo internet radio tuner, a power cable, manual, remote and rca cable to connect to your stereo. It uses WiFi to access the internet. Make sure you have Wi-Fi in your home, and that it is strong in the area you put the solo. The Solo does have a built in Wi-Fi signal meter to see how strong your Wi-Fi is. So if you put it on the bottom shelf of your stereo system and notice a weak signal you may want to put it on a middle or top shelf. The Solo works with any 802.11b,g or n router and has a built in 802.11g receiver.
After you connect to your wireless network (you will need your wireless WEP or WPA password to do this) and set the time zone on the clock, the Solo remembers everything (including station presets) when you unplug it. That is nice because no one wants to type their wireless password in more than once.
Once you are set up you can start searching for stations by genre or location or type the call sign of the station directly into the radio. You can do this via the remote control or directly on the unit itself. I like Pandora. In order to listen to Pandora you have to register your radio at Grace's web site [...] . After you create a Grace account you enter in your Pandora user name and password on the Grace site and the radio is linked to your Pandora stations. Within a minute your Pandora stations are on the Grace radio in the `personal radio' folder. Pretty cool. You can create stations on the Grace Solo, although I prefer to do that on the Pandora web site. Grace plays SIRIUS and Live365 as well but I do not have SIRIUS or Live365 VIP accounts so I can't comment on that.

I really love the Grace unit. I get all my local radio stations #my FM reception is bad at my house but my favorite FM stations - most do these days - broadcast over the internet .. so I get those, Pandora, NPR and I even started listening to the BBC 4 which is kind of cool#.
Obviously I give this a 5 star. The only negative I would say is that on a few random stations they do not show the song metadata (they all show the station metadata). I'm not sure if that is because the station is not sending it or what. You get the station and song metadata for Pandora which is the most important for me. Oh - you can even thumbs up or down Pandora songs .. very of cool.

Click Here to see more reviews about: Grace Digital GDI-IRA500 Wireless Internet Radio Adapter Featuring Pandora, NPR and SIRIUS

Convenient Access to Online Music in Your Home AM and FM radio stations all over the world stream their audio content over the Internet. Grace Digital Audio's "Solo" product line of Wi-Fi Receiver and Media Streamers allow you link this massive amount of free content, as well as a variety of pay Internet radio services, conveniently and efficiently to your stereo or home entertainment system. Setup is simple, all you need is access to a broadband Internet connection and a wireless router. Acting like any wireless device, once configured to the Wi-Fi signal(s) available and its security, if any, the Solo Wi-Fi Receiver provides quick access to literally thousand of Internet radio stations and podcasts from your home stereo without having to fire up a computer. In addition, users can listen to the hottest premium online music services like Pandora, Live365 and Sirius*. Easy access to thousands of free and premium Internet radio content streams without using a computer. View larger.

Get 36% OFF

Click here for more information about Grace Digital GDI-IRA500 Wireless Internet Radio Adapter Featuring Pandora, NPR and SIRIUS

Read More...

Pioneer VSX-1120-K 7.1 Home Theater Receiver Review

Average Reviews:

(More customer reviews)Despite the rather disappointing announcement of their departure from the Plasma arena and the de facto departure from in-house blu ray players, Pioneer appears to have made a bold move into the highly competitive mid-range receiver market. Denon and Onkyo have released fiercely competitive models in the $700 price-range that couple either excellent video processing, streamed media, and ample connectivity. My recent review of the Denon AVR891 confirmed their continued competitive product line, but I did lament it lacked some of the swiss army knife approach sometimes imperfectly utilized by Onkyo (the 891 lacks internet-streaming, surround wide processing, and basic rear-panel connectivity). That said, Denon's use of the ABT chipset (begun last year with the ABT-2010 and continued this year with the ABT-2015) was my preferred AVR video processing (I performed it over Reon XV, Farjouda chips, and lower spec'd ABT chips).
Having owned the 1120's successor both in elite (21) and no-elite (9040) form, I was always impressed by their power, sonic quality, and design. That said, they lacked what had rapidly become basic featureset in 2009 (wide or height presence configuration, only four hdmi inputs, and only analogue video processing). The 1120's little brother the VSX-1020 established a reasonably high bar for the 1120 to hurdle in bringing internet radio, iphone control, six hdmi, and wide/height processing in a tidy package widely available under $500. That said, the 1020 was a very compotent and efficient entry-level receiver, but lacked some of the longer legs for bigger rooms or thirsty speakers. Enter the 1120.
The 1120 shares the same deep chassis of the 9140 and Elite 21. At over 17" deep, it is almost four inches deeper and four pounds heavier than the 1020. It's also over two inches deeper and four and a half pounds heavier than the Denon 891. The design is conservative and almost identical to last year's 9040 with a front fascia that is masculine and angular. Beneath the pop-out front input cover are a USB port for Iphone and Ipod playback, an HDMI port and the setup microphone input. The HDMI input is a nice touch for camcorders and other temporary connected inputs (Onkyo offers similar with 708 while Denon has six rear-mounted HDMI inputs).
The rear panel is also similar to last year's 9040, but four more speaker binding posts have been added for height and wide processing (Pioneer uses MCACC wide since the auto-callibration software is not done via Audyssey DSX). Importantly, the Pioneer has 9.1 pre-outs for those looking to use an external amplifier. Unfortunately, this connectivity has been removed from the Denon AVR2311 and 891 that are natural competitors of the 1120 by price alone.
The remote is very similar to the 1020 in layout, but it is backlit and contains XM and Zone 3. While Pioneer's remote is not as easily identified with small, similar buttons compared to the Denon, it is learning and back-lit, which is a step ahead of the 891/2311/991/3311. Onyko offers a learning remote in the TX NR708, but is not fully backlit.
Setting up the receiver with MCACC is quick and easy, but each MCACC setting measures the white noise and reverb from speakers from only a single memory point whereas Audyssey MultiEQ in the Denon incorporates multiple locations' measurements. This might have an impact on callibration depending on the layout of one's room. That said, I find both tend have a significant impact on accuracy and each have their tweaking benefits.
Once I had setup my 5.1 plus heights layout, I was very impressed with the 1120. While it appears to share a lot of the same audio section with the 9040, it seems to have a wider soundstage, which might have something to do with the presence speakers (I was previously passively bi-amping the height speakers with the 9040). After listening to a variety of blu rays and SACDs from my Oppo, I was nothing but amazed by the power and quality of the sound. Please keep in mind I am of the school that callibrated mid and entry level receivers tend to offer about the same quality audio with incremental differences - speakers (and power to push them) have the biggest impact on quality. That said, this is a very capable receiver that keeps putting me in trouble with my wife to turn it down!
The 1120 really shines in video processing with the Marvell Qdeo chip that offers very similar deinterlacing proficiency to the ABT-2015, but shines with multiple noise reduction settings. On my 54" panasonic plasma, I have found that video processing via the 1120's noise reduction settings does help clean up noisy 1080i hd programing. That said, its benefit is incremental, and like all video processors, is not magical in its ability to render standard definition sources as blu ray quality. The video processing settings are applicable per input, which is ideal considering most people should only use it for cable boxes and not bdps.
While this receiver does have a few noticeable shortcomings (lack of on screen display and pandora streaming), it is an incredible package at its current street price floating between $600 and $700. Its rare ability to not molest hdmi video and apply meaningful noise reduction is excellent. Its power, flexibility, and connectivity is excellent, though I would like to see 7.1 MCH inputs. All in all, it's a very competitive offering and highly recommended.

Click Here to see more reviews about: Pioneer VSX-1120-K 7.1 Home Theater Receiver

Key Features are I20 Watts x 7 – (20Hz – 20kHz @ 8 ohm w/ .08%THD) It has a 7 Channel Direct Energy Configurable Amplifier with Surround Back. Dolby Pro-logic IIz or B Speaker, THX Select 2 Plus Certified, Dolby True-HD / DTS-HD Master Audio, Advanced MCACC with 9 Band EQ , PQLS – Multi-Channel, Auto Level Control – Multi-Channel, Sound Retriever AIR – Multi- channel . It has a Internet Radio. It supports iPod Digital USB / USB Memory Audio, HDMI 1.4(6 In / 2 out), 3-D and Audio return Channel, Dual HDMI Output, front HDMi In Marvell I080p Video Scaler. Analog to HDMi Video Conversion. It has HDMI to HDMI 1080p Scaling. Component Video (2 in / 1 out). Full Color GUI. It has PC Control with Multi-Zone A/V Pre-out.9.1 Channel Pre-outs, RS-232 & Detacheable Power andLearning Remote Control

Click here for more information about Pioneer VSX-1120-K 7.1 Home Theater Receiver

Read More...

Denon AVR-3311CI 7.2-Channel Network Home Theater Receiver with HDMI 1.4a (Black) Review

Average Reviews:

(More customer reviews)Having listened to mid-range receivers from most of the major brands, I liked the sound of the Denons the best..a bit warmer than the Onkyos, which is better for music. The Pioneers sounded nice, but lacked Audyssey (using the proprietary MACC instead). Marantz sounded great but aren't as fully featured as comparably priced Denons.
I wanted a receiver that's up-to-date with all of the latest surround sound formats and is relatively future proof, since I don't plan to upgrade again for several years. The 3311 seemed to fit the bill perfectly and I'm very happy with my purchase so far. The sound quality is great. I thought that my old Onkyo sounded pretty good, but this surpasses it by far. Audyssey MultiEQ XT does an excellent job at tailoring the equalization to compensate for the acoustical flaws in the room. I've never had a system that sounds so balanced, detailed and immersive. There's plenty of power to drive most speakers (even my inefficient Polk RTiA7's) to their potential. I was initially concerned about the reduced weight of the newer Denon mid-range receivers compared to older models, but this concern seems to be mostly unfounded, as the performance and adequate power speaks for itself. Pre-outs are included to allow for the addition of external amps, if desired. Last year's models apparently suffered from networking problems. Fortunately, these issues seem to have been resolved in the 3311 and the network features have worked flawlessly so far. By the way, the upcoming model AVR-991 is priced $200 lower and is basically the same as the 3311, except it has no pre-outs, a couple less inputs, one less zone and one remote instead of two.
To me, this unit (or the 991) is the sweet spot in the new Denon line as far as performance, features and value. It's reasonably priced, being $300 less than last year's 3310, yet has more features and probably better sound, due to the upgrade to the "XT" version of MultiEQ. It'll cost a lot more to step up to the next higher model (4311?) and, based on comments I've read, the difference in sound quality is likely to be marginal at best. The 3311 comes with a 3 year warranty (the AVR-991 warranty is only 2 yrs).
Based on my experience with this receiver so far, I'd definitely buy it again and wouldn't hesitate to recommend it to a friend. Tip: try to get it on sale. I got mine for 25% off list price despite being a newly released model.

Click Here to see more reviews about: Denon AVR-3311CI 7.2-Channel Network Home Theater Receiver with HDMI 1.4a (Black)

The Denon AVR-3311CI 7.2 Channel A/V Receiver: Premium Technology and Performance gets Networked. The new AVR-3311CI is a technological tour de force, designed for consumers wanting to network their AV system. It's also one the first to come equipped with HDMI 1.4a connectivity, including 3D pass-through (Broadcast and Blu-ray), along with Audio Return Channel. Ethernet connectivity opens up your AV system to host of exciting capabilities like audio and jpeg photo streaming via as well as hundreds of Internet radio stations. Pandora is supported along with subscription music services like Rhapsody and Napster. Flickr photo streaming is also featured. The AVR-3311CI packs a punch with 7-channels of onboard amplification producing 875-watts of total power (125 per channel) delivering detail and dynamics to music and movie soundtracks. The amplifiers can be assigned for 7.2 channel surround sound, or a 5.2 channel system in the 'main" room and power a pair of speakers in a second 'zone". This only scratches the surface of the AVR-3311CI Multi-zone (3)/multi-source (3) capability. Enhanced power amp assign features, second and third zone programming feature allow the AVR-3311CI to be the hub of a sophisticated whole house system. For video connectivity, the AVR-3311CI is equipped with 1080p and 3D (all formats) compatible HDMI 1.4a Repeating technology, delivering both audio and video to your HDTV with single HDMI cable. This HDMI connectivity supports the latest generation surround sound formats available on Blu-ray disc, including Dolby TrueHD and DD+, dts-HD and dts-HR. Also included is Dolby Laboratories new Pro Logic IIz Matrix decoding featuring front height effects channels that expands front soundstage.

Get 34% OFF

Click here for more information about Denon AVR-3311CI 7.2-Channel Network Home Theater Receiver with HDMI 1.4a (Black)

Read More...

Pioneer VSX-921-K 7.1 Home Theater Receiver, Glossy Black Review

Average Reviews:

(More customer reviews)This is a great AV receiver and occupies the sweet spot for value in pioneer's line this year. The features and connection settings are plenty for my use. I like the UI for setting up settings including the sound calibration settings for the room. The remote is basic and i wish it could have a night glow feature.

Click Here to see more reviews about: Pioneer VSX-921-K 7.1 Home Theater Receiver, Glossy Black

The Pioneer VSX-921 features a Bluetooth wireless audio option with 770 watts of high powered 7.1 home theater audio playback. Other features include 4 HDMI 1.4a 3-D ready inputs, advanced video processing and upconversion, iPad / iPhone AV playback with battery charger.

Click here for more information about Pioneer VSX-921-K 7.1 Home Theater Receiver, Glossy Black

Read More...

Pioneer VSX-1020-K 7.1 Home Theater Receiver Review

Average Reviews:

(More customer reviews)I tend to do a lot of research before making large purchasing decisions and so far this receiver is receiving a pretty rosy reception! Its predecessor, the 1019, was CNET's and Gizmodo's top mid-range receiver. Both reviewers had just as high hopes for the 1020, and Gizmodo already called it the best receiver $550 can buy, saying the 1020 "hit the sweet spot" that gave the most bang for buyer's buck.
The critics I read all raved about the excellent sound quality, but the 1020 brings some new offerings to the table for a mid-range receiver.
In short, the most valuable features you get with this model that you don't get with the next step down are:
1. A fifth HDMI port in back, an extra sixth in front (for digital cameras, computers, etc.).
2. Analog video upscaling (which I don't care too much about since most of my content is HD already or played through an upscaling player).
3. The iContolAV iPhone app. Very cool for controlling volume and switching inputs. Works simply by having your receiver connected to ethernet and your iPhone connected to the network via WiFi. A few times the app has had trouble properly connecting, but it usually works well.
4. Internet radio with programmable stations, which is cool, though you can't currently control the station selections from the iPhone App, unfortunately.
5. A color configuration interface output to your TV via the HDMI output. I can't imagine trying to configure all my speakers without seeing a graphical representation of their location on screen.
That last feature feature, the HDMI 1.4 ports that support 3D, the 7.1 surround capabilities, excellent sound quality and the iPhone App are what made the VSX-1020 the clear choice for me. I also appreciated the automatic calibration with the included microphone and the included iPod cable/compatibility, but those weren't as strong of selling points.
The only negatives of note for me is that the little front port cover is a little cheap. It's not even a door, simply a little plastic piece that pops out if you push one side. I, like others, have also experienced the issue where the receiver switches to TV/Sat when first turned on, but I've yet to determine whether that's a problem with the receiver itself or my Harmony universal remote (I'll update the review as I get more information).
One last tip to buyers, however. If you're considering listening to your phone's music over Bluetooth by buying the $99 AS-BT100 adapter, I'd consider buying a $99 Apple Airport Express instead (assuming your music is managed through iTunes). It lets you stream music from your computer to the receiver over WiFi and control what's playing via iTunes or Apple's robust "Remote" iPhone app, but more importantly the Airport Express acts as a USB print server and a one port wireless bridge (something that lets you connect wired devices to a wireless network).
That wireless bridge capability is especially valuable, since you'll need it or something similar for internet radio and iControlAV iPhone app support if your VSX-1020 receiver isn't close to your wireless router (mine isn't). Buying the Airport Express kills two birds with one stone.
UPDATE:
A few ideas have been thrown out by other Amazon posters to help alleviate the issue with the receiver switching to TV/Sat when it first turns on. The first idea is to change the receiver's settings thusly:
"1 Press Receiver , then press Home Menu.
2 Select `System Setup', then press ENTER.
3 Select `Other Setup', then press ENTER.
4 Select `HDMI Setup', then press ENTER.
5. Set Control to 'Off'."
The second idea is to adjust your TV settings like so.
"Go into Menu under HDMI-CEC and turn it Off. If the set is a Samsung look for AnyNet+ (default is normally On) and turn it Off."
I'm still having issues going directly to a given HDMI input when the unit first power on (going to "HDMI Input 1" simply toggles the current HDMI input instead of going directly to the one you want), but I've made the quirk tolerable by programming one of the buttons on my universal remote to toggle inputs, so it's easy to fix.

Click Here to see more reviews about: Pioneer VSX-1020-K 7.1 Home Theater Receiver

Key Features are110 Watts X 7, 7 Channel Configurable Amplifier, Surround Back. Dolby Pro-logic IIz or B Speaker, Dolby True-HD / DTS-HD Master Audio and Advanced MCACC. It has a 9 Band EQ.Auto Crossover Setting, USB to PC Graphs, PQLS – 2 Channel, Auto Level Control – Multi-Channel, Sound Retriever AIR – Multi- channel. It has a Internet radio. iPod Digital USB / USB Memory Audio. Its iPhone Certified, Sirius Satellite Radio, HDMI Repeater (6 In / 1 out), Analog to HDMI Video Conversion, HDMI to HDMI 1080p Scaler, Component Video (2 in / 1 out), Full Color GUI, iControl pioneer AVR iPhone / iTouch "APP" Multi-Zone A/V Pre-out, Preset Remote Control

Get 33% OFF

Click here for more information about Pioneer VSX-1020-K 7.1 Home Theater Receiver

Read More...

Yamaha YMC-700BL NeoHD WiFi Media Controller/AV Receiver (Black) Review

Average Reviews:

(More customer reviews)This unit was very easy to install although finding the IR receivers on the other components was challenging. I wish the remote had numbers on it. I understand making it simple but it makes for slow channel access. I found myself having to keep the digital cable box remote for speed and convenience. I love the internet radio access and the ipod dock is a definite add-on we were glad we purchased. The unit is small and well laid out. This is a good looking piece. Unfortunately we have the tv in a corner and the surround sound is okay but not great. I think if this was set out properly it would work quite well. I do recommend this to anyone looking for a universal remote and good quality amplifier.

Click Here to see more reviews about: Yamaha YMC-700BL NeoHD WiFi Media Controller/AV Receiver (Black)

Yamaha YMC-700BL NeoHD Controller

Get 59% OFF

Click here for more information about Yamaha YMC-700BL NeoHD WiFi Media Controller/AV Receiver (Black)

Read More...

Pioneer VSX-821-K 5.1 Home Theater Receiver, Glossy Black Review

Average Reviews:

(More customer reviews)I was looking for a midrange receiver with features and functions that are useful but not so many that I don't know what to do with them all. At the price this unit has enough HDMI ports for me to connect my PS3, Xbox, and cable box. The onscreen setup is easy enough and the instruction booklet is actually very helpful. It is nice to be able to connect my iPod and use an onscreen interface to select songs and playlists; however, it is not very nice to look at and I expected a bit more from the interface - it looks like an old MSDOS screen. I also wish the little cover for the iPod connects in the front didnt pop-off, I wish it slid so I don't have to worry about losing it. The banana connectors in the back seem quite sturdy and were easy to connect with the speaker wire. Over all I am very happy with the purchase and it is up to date enough that I will be using it for many years to come.

Click Here to see more reviews about: Pioneer VSX-821-K 5.1 Home Theater Receiver, Glossy Black

The Pioneer VSX-821 features a Bluetooth wireless audio option with 550 watts of high powered 5.1 home theater audio playback. Other features include 4 HDMI 1.4a 3-D ready inputs, hi-resolution Dolby and dts multi-channel audio playback from Blu-Ray discs, iPad / iPhone AV playback with battery charger.

Click here for more information about Pioneer VSX-821-K 5.1 Home Theater Receiver, Glossy Black

Read More...