Showing posts with label remote control extender. Show all posts
Showing posts with label remote control extender. Show all posts

8/27/2012

Cmple - REMIUM IR Extender Hidden Infrared Repeater System IR Emitters Review

Cmple - REMIUM IR Extender Hidden Infrared Repeater System IR Emitters
Average Reviews:

(More customer reviews)
As I write this I am still trying to locate information on the manufacturer of this product... The instructions, all 2 pages (one sided) don't mention who makes this.
To put it simply, while there is a relatively straight forward installation process, once you use the IR repeaters to cover up the windows of your device IR receivers, good luck having an easy time getting them to function. I have a TV, sound bar, dvd player, and Cable box connected through this system. Only the cable box seems to get any sort of reliable signal... and then only to change channels.
If I find a fix for this or even the manufacturers website I will repost.

Click Here to see more reviews about: Cmple - REMIUM IR Extender Hidden Infrared Repeater System IR Emitters



Buy Now

Click here for more information about Cmple - REMIUM IR Extender Hidden Infrared Repeater System IR Emitters

Read More...

6/08/2012

Cmple - IR Infrared Repeater System Remote Control Extender IR Emitters Review

Cmple - IR Infrared Repeater System Remote Control Extender IR Emitters
Average Reviews:

(More customer reviews)
This product was reasonably priced, arrived quickly, and works well. I used it for a small, wall-mounted TV in the kitchen where there is no room for a cable box. I placed my cable box in the crawl space under the kitchen, wired an electrical outlet to power the cable box and IR repeater, and ran the IR repeater wire and an HDMI cable through the wall. I was pleasantly surprised at how well the IR repeater works, and have my kitchen TV without the clutter of a cable box.

Click Here to see more reviews about: Cmple - IR Infrared Repeater System Remote Control Extender IR Emitters



Buy Now

Click here for more information about Cmple - IR Infrared Repeater System Remote Control Extender IR Emitters

Read More...

4/09/2012

One For All RC64RBK IRF/RF DIRECTV Backlit Universal Remote Control Review

One For All RC64RBK IRF/RF DIRECTV Backlit Universal Remote Control
Average Reviews:

(More customer reviews)
Several users remark that this remote is challenging to setup. Ignore the manual that accoompanies the remote; instead, turn on your tv and the DirecTV receiver. Move the device selector switch at the top of the remote to the DirecTV receiver position. Then, press the Menu switch and toggle down to "Parental, Fav's & Setup" and press "Select". In the next menu select "System Setup" and on the next menu select "Remote". Change the "IR/RF Setup" to "RF" and continue following the menu instructions. The receiver will lead you to quickly and easily set up your new RF remote. You'll be able to change channels through walls, doors and ceilings. Use to control a receiver in a closet or cabinet.
If you want to control more than one receiver with radio frequencies, you'll need to purchase an RF remote for each receiver. But at about $25 each, this is much less expensive than running miles of wires all over your house. And you won't have to see the unsightly receivers and their accompanying wires.One For All RC64RBK IRF/RF DIRECTV Backlit Universal Remote Control

Click Here to see more reviews about: One For All RC64RBK IRF/RF DIRECTV Backlit Universal Remote Control



Buy NowGet 25% OFF

Click here for more information about One For All RC64RBK IRF/RF DIRECTV Backlit Universal Remote Control

Read More...

12/13/2011

Terk Leapfrog Remote Control Extender Kit LFIRX Review

Terk Leapfrog Remote Control Extender Kit LFIRX
Average Reviews:

(More customer reviews)
I purchased the Terk Leapfrog to control my Tivo from the bedroom, after running cables for the audio/video through the wall. In the end, this has worked excellently for me - so let me explain why it doesn't get the full 5 stars.
Initial setup with this product couldn't be easier. You simply unpack the two pieces, plug in the two included AC adapters - and that's it! I was surprised there was no programming it to accept certain IR codes... it just picks up whatever the remote might be throwing out, and relays it appropriately. When I first unpacked it, I set the one unit right in front of my Tivo, sitting about 2 inches from the Tivo's IR receiver. I took the other one into our bedroom and plugged it in. Presto - I could control the Tivo from the bedroom.
Now that I'd confirmed it worked, I went back to my living room to try and find a nice, out of the way place for the Terk Leapfrog to sit. It obviously had to have a clear line of sight to the Tivo... which I figued left me with plenty of choices. I tried putting it on a bookshelf, that was on quite an angle from the Tivo - but with no luck. I tried hiding it behind a picture frame (where is still had a clear line of sight to the Tivo) on a table that was closer to the Tivo... but again no luck. I went on to try 4-5 other places around the room, but could never make it work consistently.
Finally, I placed it *behind* the tivo, and used the included IR 'extender' (which is a little cable, with a peanut sized IR transmitter on the end). I snaked this little cord under the tivo, and then attached the little IR transmitter so it's aiming right at the Tivo's IR reciever. This, finally, worked. Just for comparison, I can aim my Tivo remote almost anywhere in the room and have the signal picked up by the Tivo, so I'm confident that the Tivo is not the problem here.
So... The good thing about this product is that it does work... the bad thing is that it seems it needs to be aimed by a professional sharpshooter to get the signal to your device.
Pros:
-Super fast setup
-Works great with your Tivo
Cons:
-Hard to get the 'placement' of the IR sender just right.

Click Here to see more reviews about: Terk Leapfrog Remote Control Extender Kit LFIRX

Model- lf-irx vendor- audiovox electronics features- leapfrog ir remote extender extends the range of any remote control and operates through obstacles from up to 120 feet away. Freestanding units works with most remote controls and a/v components. Installs easily expandable system: add an additional receiver (lfirx-rx) and/or transmitter (lfirx_tx) sold separate.

Buy NowGet 28% OFF

Click here for more information about Terk Leapfrog Remote Control Extender Kit LFIRX

Read More...

12/09/2011

XANTECH 48010DBKit Designer Dinky Link Infrared Kit (Black) Review

XANTECH 48010DBKit Designer Dinky Link Infrared Kit (Black)
Average Reviews:

(More customer reviews)
My couch is over 45 degrees off axis from all of the equipment in my media cabinet. Prior to installing this I'd have to walk over to point the various remotes through the glass at the gear. Now I can control everything anywhere on the L-shaped couch, or even anywhere in the room since I mounted the receiver where it has clear line-of-sight to anywhere I'm likely to be.
The receiver in this kit is a tiny black rectangle that I stuck to bottom edge of the wall-mounted 50" Plasma monitor, which always faces the viewer and is up high. The size of the main controller module is also very small. I stuck that to the back of the media cabinet and ran the IR emitters to the gear (Panasonic, Sony, Denon, Verizon FIOS). There are red LEDs in both the receiver and at the emitters that light when hit by a remote signal so you can tell when things are working.
Electrically it couldn't be easier to assemble... it all just plugs together. I used an extender 1/4" stereo cable from Radio Shack to make the receiver cable long enough to reach from the monitor to the controller, which fits the plug on the receiver assy and controller perfectly. The most tedious job was figuring out where the IR receiver was on each piece of gear, and then carefully running and mounting the delicate emitter wires and emitters to the gear inside the cabinet. I used a flashlight to peer through the plastic gear faceplates to locate the IR receivers, and then verified by putting the emitters over them to see if the gear reacted to signals.
A downside with this system is that the emitters may need to be pried off the gear if you need to pull something out. Fortunately this is not hard to do with care, and the sticky film re-attaches fine. I've had to do this once, and I need to do it again to replace a single emitter with a dual for new gear (now need 5 emitters total... could go up to 8 max using duals).
These remotes are advertised for controlling equipment in another room, but based on my experience having gear get into out-of-sync power-on states I could see that being a nuisance, requiring a trip to the closet to diagnose. This isn't a problem of this repeater so much as not being sure what gear gets turned on by what remotes, and not being able to tell w/o looking at the gear.
I chose this unit because it has the new broader bandwidth being used by modern equipment, and because it is more immune to plasma flicker and florescent lighting. It works perfectly with all the remotes and all the manufacturers gear I have. It's great. I love it.

Click Here to see more reviews about: XANTECH 48010DBKit Designer Dinky Link Infrared Kit (Black)



Buy NowGet 79% OFF

Click here for more information about XANTECH 48010DBKit Designer Dinky Link Infrared Kit (Black)

Read More...

11/09/2011

Smarthome 59501 Hidden IR Repeater System, Black Review

Smarthome 59501 Hidden IR Repeater System, Black
Average Reviews:

(More customer reviews)
i own a flat screen, blu-ray, i have cable, a home theater with 5 disk dvd, and a seperate dvd recorder... this is all set up in a cabinet style media center with a flat screen mount above the cabinet. until i bought this, i had to leave the cabinet open all the time so that any of my five remotes could send the signal to it's component. now all i have is one little sensor under my tele, i can keep the cabinet shut all the time, and it makes things look so much better... everything is hidden away. i haven't had any problems with lag or delay with any of my remotes or their ability to control their pieces of hardware, and this was very easy to install. the only thing i am missing now is a good all in one remote !

Click Here to see more reviews about: Smarthome 59501 Hidden IR Repeater System, Black



Buy NowGet 44% OFF

Click here for more information about Smarthome 59501 Hidden IR Repeater System, Black

Read More...

10/31/2011

X10 POWERMID Remote Control Extender Kit PM5900 Review

X10 POWERMID Remote Control Extender Kit PM5900
Average Reviews:

(More customer reviews)
MY father recently remodelled his home, and had all the electronics hard wired behind the walls. It's a real clean installaltion, however all the equipment (reciever, cable, DVD, CD etc) are all out of infrared range.
After figuring out he needed a universal remote, as well as needing r/f capability, the search was on for his christmas present. I had a lot of trouble finding a universaal remote that would set up easily for him, has well as have the R/F capability.
In the end, i opted for the infrared remote i really wanted, and the x-10 system. the leapfrog system appeared to have a few bad reviews, and i figured spending the extra money might make the difference (only like $10)
Turned out to be a great decision. I was concerned about the system b/c the front of all the components in the media closet are very close to the door. I purchased 2 extra extender eyes (plug into the back of the R/F recieving unit, and can be stuck right on the I/R eye of your component) but i didn't even need them. One pyramid in the closet ssomehow still controls all the componants w/o even being in direct line of sight of the i/r eye on each piece of equipment.
I would reccomend buying an extra transmitter (the pyramid w/o the antenna) as you might want to be able to control from other places once you see how convenient this is. My dad has 2, one in the living room, and one in the kitchen, if he wants to control music while cooking.he'll probably end up with another for the patio outside during the summer months.
overall, highly reccomended product.

Click Here to see more reviews about: X10 POWERMID Remote Control Extender Kit PM5900



Buy Now

Click here for more information about X10 POWERMID Remote Control Extender Kit PM5900

Read More...

10/01/2011

Logitech Harmony IR Extender System (Black) Review

Logitech Harmony IR Extender System (Black)
Average Reviews:

(More customer reviews)
I am using this IR extender with various remotes and am very happy with the performance. But my road to satisfaction had a bump I can help you avoid. I, like most folks, like to test things out to see if they work before I invest much time in installation. Installation is minimal in this case, just running some wires and making room to plug the device in on a pretty full UPS, but I wanted to test it out none the less. So I plugged everything in, moved the receiver around the corner, pointed the stylish blaster at the devices (an ATT Uverse box, TV and DVD player) and .... nothing happened. Added a mini blaster and ... I got very erratic transmission. Moved them closer, farther away ... still awful performance. I could see the lights responding on the blaster. I read the instructions again, which are very brief because the product is so simple, and still could not figure it out.
So, I called Logitech support, got escalated a level and then got an answer to my blunder. I am now appropriately humbled. I was pointing the shinny rounded edge toward the electronics. It is the side with the wires coming out that needs to be pointed in the general direction of the devices to be controlled. It makes total sense for when you install the blasters. They were designed to sit on a shelf slightly in front of any equipment with their wires extending toward the back of the shelf. But, when I was testing from in front of the equipment, I did not think to turn the blaster around so the side with all of the wires attached was pointing at the electronics.
Once over this bump in the road I created, the product worked well with all of my remotes. Of note, the IR receiver - the only part that sits out in the open - has a cord that is 8 feet in length and ends in what looks just like a 3.5mm audio jack. That should cover most applications. However, if additional length is needed, a headphone cord extender would fit - I just do not know of the signal would travel the additional length.


Click Here to see more reviews about: Logitech Harmony IR Extender System (Black)

The Logitech Harmony IR Extender System lets you control your home-entertainment devices hidden inside a closed cabinet with most infrared remotes.

Buy NowGet 16% OFF

Click here for more information about Logitech Harmony IR Extender System (Black)

Read More...