Showing posts with label dolby. Show all posts
Showing posts with label dolby. Show all posts

7/26/2012

Onkyo HTS590 5.1 Channel Component Home Theater Audio System Review

Onkyo HTS590 5.1 Channel  Component Home Theater Audio System
Average Reviews:

(More customer reviews)
I purchased this system based on reviews I read at a major retailer's website and here at Amazon. I wanted a home theater system without a DVD player which would offer flexibility. This system certainly offers performance and flexibility for the price. Many features and easy setup.
There are some easy and economical things we did to improve the sound. First, because this system allows you to upgrade the speaker wire, we bought 16 gauge speaker wire from a major discount chain for the center, front and rear channel speakers. We got 14 gauge speaker wire for the subwoofer (thicker wire passes more current to the sub and has improved the performance of the 8-inch woofer). We spent $14 for a coaxial cable at another discount store which carries the digital signal from the DVD player to the Onkyo receiver--this improved EVERYTHING--movies and music. We found speaker stands at a major discount chain for $78--speakers sound much better when they have a strong/rigid support. This may sound like stuff an audiophile would do to a $5000 audio system, but it all is cheap, easy and effective. Sound improved by about 45%.
We were surprised at the tuner in the Onkyo receiver--we're using a small Terk powered FM antenna and getting very good FM stereo reception in our hilly river community. All in all, for the small cost of this system, we're enjoying home theater greatly. We might spend a little to get a new sub at some time, but for now we're really happy.

Click Here to see more reviews about: Onkyo HTS590 5.1 Channel Component Home Theater Audio System

Onkyo 6 Channel HTIB HTS590

Buy Now

Click here for more information about Onkyo HTS590 5.1 Channel Component Home Theater Audio System

Read More...

5/04/2012

Denon AVR-788 Dolby Digital Surround Receiver Review

Denon AVR-788 Dolby Digital Surround Receiver
Average Reviews:

(More customer reviews)
I'd give it 4.5 stars if I could.
I've had this for about four weeks and only now I am beginning to finish the setup. It sounds very good, for both music and movies. Here are the pluses:
1. It has a audio calibration system that equalises the response to match your listening environment. This one has a 6-position Audyssey MultEQ system (the capability to measure more than one position is important) It seems to do a fine job, although it said my center speaker was inverted in phase when it was in fact correctly wired. It computed the speaker distances precisely and The EQ result looks (they show you graphs) and sounds correct. The setup takes a good 20-25 minutes and you are supposed to do it each time you move furniture. Thats a bit of a drag.
2. It has audio over HDMI support (from the PS3 for e.g.) and supports deep color. It cannot do DTS-HD or Dolby TrueHD, but it can take a 7.1 uncompressed PCM input, which is all you need (i think) because the blu-ray spec requires PCM while DTS-HD and TrueHD are optional. I am not using any of these features yet (so this point is from theory not experiment), but its good to have these for future blu-ray support.
3. It does not get very hot at my listening levels (-12 to -24 db). So I was able to cram it into my existing cabinet (albeit with a little carpentry, since it is over a foot deep)
4. Standby power consumption is under 2 watts. While playing music it consumes about 60 watts at my listening levels.
Like I said, it works well for me and I plan to keep it. But its not perfect:
The Downsides:
1. The remote is terrible, and the user interface is not so good. I liked the remote in pictures - it has big buttons and less clutter than other receiver remotes, but this one is unique. It has buttons on the back (with a cover), That would be alright if you only put those buttons there that you dont need often. However I find that some everyday buttons are in the back - for e.g. the button that changes Sound Modes (DTS/Dolby/ROck/Jazz etc. is in the back) Not well thought out. The manual way to save each FM station requires you to press a button on the back and then two buttons on the front to save one preset. Go figure!
I suspect that all high/mid end receivers have so many features that it will be tough to find one with a good interface, unless you get a all-in-one system like a Bose Lifestyle or 3-2-1.
2. The manual is not fun reading - and some things are not explained. I had to call Denon once to figure out something. (it took two calls and a 5 minute hold the second time, and then I got to a somewhat bored sounding technician. But he seemed knowledgeable.)
3. When I connected the subwoofer line level output to my Bose 701s LFE input (powered subwoofer) I got an audible hum (probably at 60 Hz). I had to buy a ground loop isolator from Radioshack ($12) that removed it.
Overall, a good receiver. In an ideal world, you would try out five brands and keep the one that sounds best to you. The only store where I could compare two brands in A/B fashion was Tweeter, where they had Pioneers and Yamahas set up. I liked the Pioneer Elites better but I think it was because the Yamaha's were setup sub-optimally. Circuit City let me hear a Denon but without the EQ. All in all, I feel that the speakers make a bigger difference than the receiver. I hope some of this helps you in case you are agonizing over the choices. If you'd like to read more about my home theater components, there is a blog entry here: http://spyglasshill.wordpress.com/2008/08/20/the-lexus-of-home-theatre/

Click Here to see more reviews about: Denon AVR-788 Dolby Digital Surround Receiver

The Denon AVR-788 delivers power and performance and is ready to take on HD video sources.Its video circuitry now has HDMI 1.3a audio/video capabilities supporting deep color video signals and digital surround audio signals.This makes ease of connection and operation a snap for the beginner or expert user.Attention to audio detail and accuracy has been improved with the addition of Audyssey MultEQ processing, assuring audio room balance even with difficult acoustical conditions.Dolby Digital and DTS Digital signals are masterfully decoded and reproduced yielding stunning surround sound presence like never before.Calibration has been simplified using the plug and go concept with the supplied microphone.Using the optional ASD-3W/3N iPod docks allows for network capability, allowing more sources to be played back from devices on your home network.Additionally the AVR-788 can accommodate two-source two-zone control for enhanced audio installations.

Buy Now

Click here for more information about Denon AVR-788 Dolby Digital Surround Receiver

Read More...

2/10/2012

Sony STR-DG500 6.1 Channel Home Theater Receiver Review

Sony STR-DG500 6.1 Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
This 6.1 reciever offers 110 w/channel with subwoofer output. Sony has clearly worked to make the receiver smarter to provide the best audio experience with minimal intervention from the user: a microphone input (mic provided) automatically locates each speaker attached and balances all outputs.
If you're interested in simply having great home theater experience, without excessive tweaking, this is the reciever for you.
Pros - multiple a/v inputs, with support for component video and and optical connections for dvd audio.
Cons - no upsampling video sources (component output from component input only), no optical connection for cd players.

Click Here to see more reviews about: Sony STR-DG500 6.1 Channel Home Theater Receiver



Buy Now

Click here for more information about Sony STR-DG500 6.1 Channel Home Theater Receiver

Read More...

11/17/2011

Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver Review

Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I've had this receiver & its ipod dock for about 45 days. Picked this one over the 663 for its video upscaling. I use it mainly for watching dvds and ipod videos, streaming netflix, and listening to ipod and HD radio music.
Pros: Quality of sound and video output met my high expectations. (I'm biased toward Yamaha already FWIW). Surround fields are versatile & distinct. The enhancer modes are fantastic for low volume listening. Headphone listening is stellar. Config menus are straightforward. YPAO was easy to set up, though I wound up tweaking rear speaker adjustments up a bit as personal preference. The remote runs all our gear. I dusted off old concert and movie DVDs and this receiver makes them seem new again.
Cons: No macro mode on the remote to power everything on & off with one button. HD radio control is not intuitive. So far I haven't figured out if I can navigate a docked ipod's menus with my TV osd which would be nice.
Bottom line: I saved up and looked at a LOT of receivers before choosing this one, and I'm not disappointed at all. The RX-V863 is everything advertised and lives up to Yammy's top shelf reputation.

Click Here to see more reviews about: Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver

The Yamaha RX-V863BL 7.2-channel digital home theater receiver delivers 735W powerful surround sound over 7 speakers (105W x 7).Full support for HD audio formats ensures maximum enjoyment of all high definition sources. Other advantages include full HD 1080p video upscaling with 3 HDMI inputs, an HD Radio tuner, as well as exclusive Yamaha features such as Pure Direct for the highest possible signal purity, YPAO sound optimization and 4 SCENE buttons for quick and easy browsing, selection, and automated setup of audio sources.

Buy NowGet 30% OFF

Click here for more information about Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver

Read More...

10/08/2011

Onkyo TX-NR808 7.2-Channel Network Home Theater Receiver (Black) Review

Onkyo TX-NR808 7.2-Channel Network Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I bought the ONKYO TX-NR808 to replace my aging 10 year old Lexicon DC-2 pre-amp and Carver Professional amps. The Onkyo powering Miller and Kreisel THX 750 5.1 speaker system.
I figured that after 10 years I could use a audio update even though the Lexicon is still a amazing piece of equipment but I didn't want to spend $6500 this time around.
I wanted a receiver that had all of the newer DTS and Dolby surround formats and could power the 4 ohm M&K speakers (8 vs 4 ohm setting in the setup menus).
It sounds great I love the video switching and the great on screen display of settings.
I have a Netgear 9150 Digital entertainer Elite hooked to it with only one HDMI cable. Being able to use the HDMI really cleans up the cabling since it can also send the audio over the same cable. Same thing goes for my HD cable box, HDMI no seperate audio cable needed.
I haven't had any problems with the Ethernet not connecting, even though I did let it update via the internet. The streaming off connected networked computer is nice also, without any problems. Pandora works flawlessly.
For the price and features it cannot be beat.
Also Amazon has it for the lowest price.
UPDATE: 07-02-11
Still no problems. I now have a HPPC hooked up running WMC and Boxee.
Awesome product for the money.

Click Here to see more reviews about: Onkyo TX-NR808 7.2-Channel Network Home Theater Receiver (Black)

Meet Onkyo's mid-range powerhouse. The TX-NR808 earns its prestigious THX Select2 Plus certification by blending the latest connectivity and processing technology with Onkyo's renowned amplification prowess. As a network-capable receiver, the TX-NR808 is your gateway to streaming audio from your PC or internet radio. Other connection highlights include seven HDMI 1.4a inputs with 3D and Audio Return Channel capability; 7.1-multichannel analog inputs for legacy components; a Universal port for Onkyo peripherals; a USB port for iPod models and flash memory devices; and an analog RGB video input for your PC. Employing two advanced 32-bit DSP chips and low-jitter 24-bit Burr-Brown DACs, the TX-NR808 effortlessly handles your audio-processing needs. Whether it's lossless Dolby and DTS formats on Blu-ray Disc, or new-dimension surround formats from Audyssey and Dolby, your audio signals retain every lifelike nuance.All things considered, the TX-NR808 is a serious challenger for the middleweight crown.

Buy Now

Click here for more information about Onkyo TX-NR808 7.2-Channel Network Home Theater Receiver (Black)

Read More...

9/25/2011

Denon AVR1610 5.1-Channel Home Theater Receiver with 1080p HDMI Connectivity Review

Denon AVR1610 5.1-Channel Home Theater Receiver with 1080p HDMI Connectivity
Average Reviews:

(More customer reviews)
Based on a sub-$400 budget, I focused on this and the Yamaha 465. In researching it, a toss-up really emerged and the decision was made in talking to a very knowledgeable guy at Crutchfield. Having set it up last night and having played with it the better part of today, I am very content with my purchase. I fired up some Blu Ray's with both PCM and DTS-MA/ True HD and was very pleased with the upgrade over standard DD/DTS. The soundstage was just bigger. The opening scene from my kids favorite movie, Cars, was no longer weak. The opening race scene was clear and appropriately loud. The bump on my stars comes from the fact that the manual is awful. I gave up on it early on and went with the trial and error approach with the on-screen menu, which is more than adequate, but you need to have a basic tech sense in order to take that route. On another set-up note, the microphone setup is well done and made a big difference in the sound generated from my SS speakers, before versus after.

Click Here to see more reviews about: Denon AVR1610 5.1-Channel Home Theater Receiver with 1080p HDMI Connectivity

The Denon AVR-1610 5.1-Channel Home Theater Receiver - Performance, technology and affordability are the hallmarks of the AVR-1610. A powerful 5 channel x 75W amplifier section delivers detail and dynamics to music and movie soundtracks. It's equipped with 1080p compatible HDMI 1.3a Repeating technology, delivering both audio and video to your HDTV with single HDMI cable. This HDMI connectivity supports the latest generation surround sound formats available on Blu-ray disc, including Dolby TrueHD and DD+, dts-HD and dts-HR. Also included is Dolby Laboratories new Pro Logic IIz Matrix decoding featuring front height effects channels that expands front soundstage. The AVR1610 boast a number of Audyssey technologies. Advanced Audyssey MultEQ analyzes a speaker systems interaction with room acoustics, and then delivers custom tailored correction processing to optimize clarity and tonal balance throughout the listening space. Audyssey Dynamic Volume is an automatic volume-leveling system that tracks audio dynamics to eliminate the irritating volume swings between TV shows and commercials. Audyssey Dynamic EQ is also on board to ensure rich bass and smooth tonal balance at low volume listening levels. In addition to enhanced HDMI 1.3 repeating (3 in, 1 out), the AVR1610 features component video switching (2 in, 1 out), analog to HDMI conversion (480i to 480p) and seven analog inputs. A front-panel audio/video input allows quick and easy connection of camcorders and game systems. System setup is simplified by a new, enhanced icon-based on-screen display that is delivered over HDMI. System expansion is available with optional accessories. For media networking, use the optional ASD-3N and ASD-3W. For iPod connectivity, use the ASD-3N/3W, as well as the ASD-11. When connecting iPod and other MP3 players, the AVR-1610 features Denon's exclusive Compressed Audio Restorer to improve sound quality and dynamics.

Buy Now

Click here for more information about Denon AVR1610 5.1-Channel Home Theater Receiver with 1080p HDMI Connectivity

Read More...

8/25/2011

Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black) Review

Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I finally received my Pioneer 1019 last night. I ended up staying up way too late last night setting this up. I purchased the Pioneer 1019 after a lengthy decision process between the Denon 1910, Onkyo 607 and Yamaha 765. I needed 4 HDMI so the earlier models wouldn't work and I was also limited in footprint depth so it was these 4. I went with the Pio because I've always been a fan of the sound and quality and each of the others had one or two things wrong (Denon not available, Onkyo quality issues (?), Yammy no assignable inputs). My one concern with the Pio going in was the revamped amps and the decline in weight. Would it impact quality of sound and power? Based on my early tests, NO. This unit has a great, clean sound with lots of detail at low levels and high. I did not hear any hint of strain.
Design
While the unit is smaller and lighter than the 1018 it doesn't look `cheap' and it still has enough bulk to it to make you think it has power. It looks great in the rack. Remote is a bit confusing but I won't use that much after setup and the Harmony database had all the relevant codes, a nice surprise for such a recent release.
The Setup Process
It was pretty easy to get all of the speakers and components hooked up. The manual stinks but I had spent a fair amount of time with the manual online in advance and after a few reads you can fill in the blanks. It took me about an hour to get all of the old equipment out and the new equipment in. Assigning the inputs was relatively straightforward. Renaming inputs was awkward due to the way they handle text input but it was very flexible. I had a little trouble assigning the Optical audio signal from my Macbook along with an HDMI input. I first tried to assign the optical directly to an HDMI input but you can't do that. Instead I had to assign both the HDMI and Optical to an entirely different Input Name (I chose DVR). It worked fine but I suspect that means I really lost a video input since I can't send anything else to the original HDMI input. Not a huge deal as I don't use all the inputs but it was still annoying.
I haven't done MCACC yet but I did use the manual speaker setup and my speaker settings from my old Sony AVR and input those here. That was pretty easy and even with this rudimentary setup the sound was great. Even my wife (who is happy with TV speakers alone) commented on the improvement in quality.
I ran though some of the DSPs and effects but I prefer to set everything to DIRECT, especially on BDs but it was nice to use the Extended Stereo for my iPod and get sound from all of the speakers.
Video
I had lots of questions on the video scaler. I agree with most posters that you should not buy an AVR for this capability. Most TVs will do a better job than any $500 AVR. My TV is a 2006 model though and it has pretty average scaling so I wanted to see how it would look. I hooked up my Comcast DVR with both HDMI and with Component/Optical to gauge the difference. HDMI looks great (and no scaling, of course) but there was no impact on visual signal. I did not have any annoying audio lags either. Component also looks really good for HD signals. I could not tell the difference between the HDMI and Component signals on HD channels.
I then tried it on some SD channels with the scaler set to 1080p. The AVR did fine but it wasn't any better than my TV. No worse either but then I already mentioned my scaler is pretty average. So, as I said earlier, don't buy the unit for the scaler but it's not a negative either. Just try it for your sources and TV and it may or may not generate any improvement in PQ.
The good news is that it does a very good job of upconversion (switching analog signals to digital) which means you can have 6 HD sources (4 HDMI and 2 Component) which is nice.
The one odd thing I found was in the aspect ratio settings for 4:3 signals. The default is `Through' which would make me think it sends the signal untouched but it is actually for stretching the signal (and it does a bad job of that). I switched the signal to `Normal' and it then just passed the 4:3 signal untouched - a definite improvement.
All other sources looked great. Panny BD35 looks and sounds great and I was relieved to see that my Macbook was able to pass a clean signal through the AVR to the TV.
Audio
So the real question is about how this unit sounds. As I mentioned earlier, I am really pleased with the quality and balance. Everything sounds warm and detailed. I expect it to improve even further with the MCACC adjustments. I've listened to quite a few units over time and this has all of the Pioneer sound and quality you expect from them. I don't think anyone will be disappointed with the sound or the power (Of course, if you are willing to spend 3x the $$ then you can get better quality from the Elite series. If you have the cash, definitely buy one of those. If you are looking to spend

Click Here to see more reviews about: Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black)

The VSX-1019AH-K represents the pinnacle of the Pioneer receiver line.This hub for your home entertainment center allows you to enjoy your favorite movies on Blu-ray disc, DVD or VHS on your flat-panel television like never before. With standard features that include a phenomenal ability to upscale and convert analog video signals to 1080p when transmitted through HDMI to your high definition television, the VSX-1019AH-Ks video scaler presents you with nothing but the best quality possible today regardless of what video source it receives.

Buy NowGet 6% OFF

Click here for more information about Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black)

Read More...

8/04/2011

Onkyo TX-SR508 7.1-Channel Home Theater Receiver (Black) Review

Onkyo TX-SR508 7.1-Channel Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
The sound from my ten year old Onkyo TX-DS474 was now inferior and I had read very good reviews of the Onkyo SR 507, so decided to pre order the brand new SR 508. It arrived from Amazon on April 29th. I used the built in equalizer to set up the speakers, connected the receiver with brand new HDMI v1.4 cables and connected it to my Dish satellite receiver, my Panasonic BluRay DVD player and my Panasonic HDTV. The sound was excellent. Whereas before we had to turn up the volume too loud to follow dialog on some shows, or else it was not clear, with the SR 508 the sound was so much clearer that we could keep the volume much lower.
After about three days I noticed that although I would assign the input as cab/sat, the receiver indicated ipod (now no ipod dock was connected to the receiver) but the sound still came through from the satellite box. Strange but no problem. Then exactly one week after receiving the receiver, in the middle of watching a show, the picture and sound went blank. No pushing of different buttons on the remote would make it work. My first reaction was a bad HDMI cable, so I changed it. Nothing. I switched to the DVD player, but again blank. So then I hooked up the satellite box and the DVD player directly to the TV by separate HDMI cables, turned on the TV speakers, and the TV works again. Obviously the SR 508 suddenly failed and would not even work as a pass through. I am returning the set to Amazon for a replacement. If the replacement works fine for a reasonable amount of time, I will update this review.
I chose Onkyo partially because of its RIHD feature in conjunction with Panasonic. In my experience that only works so-so. Turning on the BluRay DVD player did switch the receiver directly to DVD. But turning it off does not switch back automatically to cab/sat. Turning off the TV also turns off the Onkyo, but not vice versa. You still have to turn on the Onkyo receiver separately.
One unexpected problem with the receiver is that the zone 2 input works only with an analog signal. On my DS-474, I have set up output B to speakers in my screened in porch to be able to listen to CDs or TV there. The B speakers work with digital. Now all my signal inputs for zone 2 are digital, so it appears that the zone 2 feature is useless. Bummer!
I should specify that I am not at all techie, so there may be work arounds that I don't know!
Update#1: The unit failed Thursday evening, I requested a replacement online from Amazon on Friday noon, it arrived at my house on Saturday at about 2pm. I'm sure everyone would agree that that is outstanding customer service from Amazon. I have now (Sunday) installed the replacement unit and again it appears to be working great. Provided it continues to do so, I will add a second update and change my rating to four stars. I remain disappointed that the zone 2 is not digital, hence not 5 stars.
Update #2: Four days after installing the second receiver, it also failed in the same way. However, at the bottom of the "Troubleshooting" page in the user manual, I found the following comment: "The AV receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lock up. In the unlikely event this happens, unplug the power cord from the wall outlet, wait at least five seconds and then plug it in again."
That worked and it has not locked up again in the last ten days. However, I certainly take issue with the "rare circumstances" and "unlikely event" and I can't imagine any special event that may have caused it. My receiver is in a cabinet with the plug behind it, so unplugging is quite inconvenient. This said, the sound from the receiver is really clear so, if this problem does not recur frequently, I will be happy with the purchase. I'm changing my rating from one star to three stars.

Click Here to see more reviews about: Onkyo TX-SR508 7.1-Channel Home Theater Receiver (Black)

Reciever, Onkyo ,Tx SR508 Stereo

Buy Now

Click here for more information about Onkyo TX-SR508 7.1-Channel Home Theater Receiver (Black)

Read More...