Showing posts with label component cable. Show all posts
Showing posts with label component cable. Show all posts

4/13/2012

Monster Cable SV1/100-2M Monster Standard Video/Interlink 100 A/V Kit (RCA) 2 m. set (6.56 ft.) Review

Monster Cable SV1/100-2M Monster Standard Video/Interlink 100 A/V Kit (RCA) 2 m. set (6.56 ft.)
Average Reviews:

(More customer reviews)
These are pretty good cables. No noticable line noise from the VCR to the tv. I was able to get them for less than $10 delivered, so they were a great deal.

Click Here to see more reviews about: Monster Cable SV1/100-2M Monster Standard Video/Interlink 100 A/V Kit (RCA) 2 m. set (6.56 ft.)

Inferior cables equal inferior sound and picture.There are several different types of cable that can deliver audio/video from your VCR or camcorder to your TV. The RF coaxial cable people commonly use delivers second-rate performance. It carries video and audio signals together, which is modulated to the same high frequencies used by TV stations when they transmit. This process can increase the amount of interference your system picks up, resulting in inferior quality.And, if you're only using RF cables to connect your VCR to your TV, you're only getting mono sound when you watch tapes.Experience the Monster Standard difference.With Monster Standard A/V kit, you'll experience stereo sound when you watch video tapes, because you're using separate audio and video cables to carry each signal. Unlike ordinary RF cables, which aren't designed for optimum A/V performance, Monster Standard audio and video cables feature special low-loss construction with a dual foil and braided copper shield to reject interference that can cause annoying problems including ghosting or a snowy picture. 24k gold contact RCA connectors resist corrosion and ensure maximum signal transfer. A low density structured foam dielectric is used for low-loss video signal transfer.Connect your components with Monster Standard interconnect cables for the sharpest, most lifelike video picture and natural sound reproduction.Don't compromise your A/V system's performance.For the best possible picture and sound when you're on a budget, Monster Standard audio and video cables offer the highest manufacturing quality at a very affordable price.

Buy NowGet 22% OFF

Click here for more information about Monster Cable SV1/100-2M Monster Standard Video/Interlink 100 A/V Kit (RCA) 2 m. set (6.56 ft.)

Read More...

10/31/2011

Datacomm 50-3323-WH-KIT Flat Panel TV Cable Organizer Kit with Power Solution (White) Review

Datacomm 50-3323-WH-KIT Flat Panel TV Cable Organizer Kit with Power Solution (White)
Average Reviews:

(More customer reviews)
I've had this kit sitting next to the TV for a week and finally decided to get going and get the TV set mounted today before the wife got home. She was tickled when she saw the nice results.
Like the other reviewers I found the kit easy to install and the internet video provided a great walk-through. I would however offer the following tips:
1. Before you begin you should test all cables that will be going behind the wall and ensure that they working perfectly. Don't wait till the end and hope everything works out. You should also carefully measure for the needed lengths of the cables that will be hidden. It's frustrating to almost get to the finish line only to realize that your HDMI cable is 2' short. Add a foot or two to your measurements; you can always tuck any excess into the wall.
2. The kit supplied power connector (the upper one that your TV's power cord plugs into) is rather stiff. I found it useful to plug and unplug the TV's power cord into it six or seven times before mounting it, and that payed off with a smoother connection at the end of the installation.
3. A pair of needle-nose pliers is very useful for bending wire ends into "hooks" for the screw-down connections to the upper power connector, as the supplied electrical wire is very rigid.
4. The product installation video shows the "Wings" of the electrical boxes and plates as being secured with a turn or two of the supplied screws. This gave me the impression that the screws for the wings just needed a couple of turns and then the wings would then pop into position and lock the box or plate into place. My experience was that the screws have to be continuously tightened until the wings at last are snug against the drywall and the plate or box is locked into place. This might be a no-brainer to some but I thought I'd point it out for the rest of us.
5. Take your time and measure and mark the locations of your cut-outs carefully so that both plates line up neatly. You get bonus points if you use a small bubble level when tracing your cut-outs so that both are nice and plumb. I mean, why not do the job right? Yep, you are doing this job yourself to save money, but don't let anyone looking at your work think, "Hmm...a pro would STILL have done a much nicer job!"
6. If this is your first time mounting a TV on a wall you might be tempted to try and finish the job by hefting the TV into place by yourself (if working alone). Unless your TV is very small this is a mistake. Mounting this 40" TV by myself was a real pain and a bit foolish.
Bonus Tool: An oscillating multi-tool makes beautiful clean cuts in drywall like a hot knife through butter. They can be had for as little as $40.00 bucks these days. Amazon sells them at a good price. Not necessary, but quite useful for a number of household projects. I love mine and it made this job all the easier.
When you are all finished, have a sip of your favorite drink and pat yourself on the back for the hundreds of dollars in TV installation and electrician costs that you just saved!

Click Here to see more reviews about: Datacomm 50-3323-WH-KIT Flat Panel TV Cable Organizer Kit with Power Solution (White)

DATACOMM FLAT PNL CBL organizer kit with power solution

Buy NowGet 36% OFF

Click here for more information about Datacomm 50-3323-WH-KIT Flat Panel TV Cable Organizer Kit with Power Solution (White)

Read More...